By: Dalvin Rumsey
When it comes to the recovery of data from a hard disk, the best option for any firm is to use the Raid data recovery method. It is a very complex process that tries to repair the damage done by the client before sending the hard disk to the data recovery firm. It is never advisable for a user to try and recover the data himself. These clients may use certain system utilities tools in order to repair the array, but they may very often cause even more trouble. And, as when things go bad, they usually do when the data is critical, these hard disks should be directly taken to a firm that is specialized in data recovery. For example, previous happenings have showed that, when a RAID failure occurs and results in the loss of important data, somebody’s job is on the line! If the data is not recovered, then things get quite complicated, for the employee, as well as for the employer.
Therefore, the best action you can take in the situation of a Raid data recovery problem is to immediately send the hard disk to a specialized firm. Should a serious system failure occur, the whole pressure is transferred to the hard disk data recovery professionals. As the users are in the habit of starting troubleshooting processes in order to solve the problem, the data recovery experts must also repair the damage done by these processes, as they can make the data impossible to recover. The information involved in such a situation can cost many hundreds of thousands, possibly millions of dollars in labor and resources to create. This is the reason why the executives are not at all interested in finding out the cause of the failure, they just care about the fact that the server has crashed and that the problem must be immediately solved.
It is true that the Raid data recovery process can be pretty expensive, but in most cases it is nothing compared to trying to recreate the data that has been destroyed. Not to speak about the fact that getting the data back could be enough to save someone’s job!
The procedures that Raid data recovery consists of start by making sure all of the drives are properly functioning. This may mean taking the physically damaged drives into the clean room and try to make all the necessary repairs, in order for them to normally function again. The hard disk data recovery technician then initiates a very low-level process that allows him to work around bad sectors of the disk. It is in fact making complete sector-by-sector clones of every drive. The original source drive is being put in a “write protect” mode, in order to protect the existing data during the cloning process. The actual recovery process is performed on these cloned copies!
There are many elements that dictate the high price of the Raid data recovery process: the file system, the total size of the damaged drives and the situation of failure. Therefore, the best thing you can do is avoid the damage and a job loss by backing up your data!
Article Source: http://www.marketingarticlebank.com
Visit right now – Raid Data Recovery Specialists in Hard Disk Data Recovery, exchange server recovery and linux recovery.